TrussLox distributes products nationwide please request a quote for more information.

TrussLox recommends that you follow the industry standard set forth by your truss manufacturer specifications. TrussLox recommends one (1) TrussLox Spreader Bar (SB) per 25 square feet for a typical truss bracing building (1 SB / 25 sq. ft.).

Limited Warranty: TrussLox LLC works diligently to provide the highest quality, Made-in-USA products that are free of manufacturing defects in workmanship and materials. TrussLox LLC will not warranty products against normal everyday use, modifications, improper use, damage, negligence or if product is used for a purpose for which it was not designed. TrussLox LLC places job site safety first, and if the end user experiences a product failure within ninety (90) days of purchase, the end user may request a (Step 1) Warranty Review from TrussLox LLC direct, and with the submission of a detailed incident report by emailing: info@trusslox.com. The end user will be required to send photos of whole product, and of the compromised area of the product. (Step 2) If TrussLox engineers require the product to be returned, the end user will ship the product prepaid, along with the Product Proof of Purchase Receipt (dated within 90 days of purchase), to TrussLox LLC, 2033 Main Street, Billings, MT 59105. TrussLox LLC engineers will inspect and evaluate the product to determine cause of the defect. If the product is deemed as a manufacturer defect, and is within the limited warranty terms, TrussLox LLC will replace the product directly to the end user at no additional charge.

READ PRIOR TO TRUSSLOX SPREADER BAR INSTALLATION:
1. TrussLox Spreader Bars are intended for temporary truss bracing ONLY.
2. TrussLox Spreader Bars do NOT prevent lateral sway of trusses. Follow truss manufacturers recommendation for truss sway prevention.
3. Do NOT walk or stand on TrussLox Spreader Bars – this tool is NOT a step.
4. Prior to TrussLox Spreader Bar installation, inspect each tool for cracks, wear, and/or compromised areas. Dispose of any damaged tools.
5. The screw holes on the top portion of the TrussLox Spreader Bars may be utilized for additional securing purposes on truss members.
6. Set each truss into correct position and secure TrussLox Spreader Bar as shown in the instructional video on our website at www.trusslox.com.
7. Use your truss manufacturers suggested guidelines/specifications for temporary bracing placement.
8. Use caution when removing TrussLox Spreader Bars from truss members. Do NOT drop from roof. TrussLox Spreader Bars is designed with a nose hole that may be used for lowering tools safely from the roof to the floor with a rope or cable.

To learn more and download resources visit our Safety Guideline Page